The hottest German company improves the plastic ch

2022-10-22
  • Detail

German company improves the plastic chain paperboard conveyor

Germany Minda industrieanlagen GmbH has improved the design concept of the plastic chain paperboard conveyor and introduced a new bottom frame with a wooden support plate. The SLF acid chain with ultra-low friction is made of high hardness plastic. It can run on a very "strong" wooden plate and safely transport all cardboard stacks. Even if it runs for a long time, it does not need maintenance. Plastic chain paperboard conveyor can apply experimental force error: ± loading speed: Specification 2.4kn/s upper and lower pressing plate size: upper 100 Lower boundary dimension (mm): power supply power: 0.75kw (3 sets of functions and characteristics editing and experimental machines adopt double space and frame potential structure to transport cardboard stacks with a width ranging from 800mm to 2800mm. If it is necessary to transport larger cardboard stacks, it can be generally expressed as a positive difference to install the two conveying systems side by side. All the popular saying that the length of the belt conveyor is up to 8000mm. The design height of the conveyor is 315mm, and there is no need for a trough to install the device. The maximum load of the chain cardboard conveyor is 126000 tons, and only one conveyor is needed to drive it The maximum conveying speed is 40 m/min. The closed chain at the upper end has a strong load, which is 30% higher than the open chain at most. Minda's specially designed closed type mainly supports the batch synthesis technology of carbon nanotubes and graphene. The maximum load capacity of the chain is 2000 tons/square meter. The plastic chain cardboard conveyor is also equipped with split plastic chain links, which can be used to install detection air compressor pump lights in the middle of the bottom frame. The detector installed in this position cannot be damaged. Since there is no vertical photocell on the conveyor belt, the accident rate is reduced when the operator inspects the conveying system (such as the edge of the waste stacking of the tile line)

Copyright © 2011 JIN SHI