Carpenters, this is a post that scares you

2022-07-22
  • Detail

This editor is a young man with fresh literature and art. Although the development of furniture market now affects wooden furniture, this editor still likes the overall woodworking design. This will make your home full of a natural literary atmosphere

this editor is a young man with fresh literature and art. Although the development of furniture market now affects wooden furniture, this editor still likes the overall woodworking design. This will make your home full of a natural literary atmosphere! Although wood is delicate, it is also fragile, just like beautiful things are easy to wither. If carpentry is unreliable, your literary flavor is a few pieces of rotten wood. Therefore, the acceptance of carpentry is extremely important for this part! SO! What details should we pay attention to in woodworking acceptance? This series summarizes five aspects. Wenqing, take it away! Here comes the dry goods. 1. Drawings, drawings, drawings! Please make the design drawings of furniture before woodworking. During the acceptance, we should first see whether it is made strictly according to the drawings, and then whether the materials are selected correctly

2. The size of the gap is an important step in the acceptance. The seam of wood sealing line, corner line, waist line decorative panel must not exceed 0.2mm, the seam of line and line clip must not exceed 0.3mm, and the seam of decorative panel and plate must not exceed 0.2mm. 3. The structure and shape of the wooden frame should be straight in both horizontal and vertical directions, without checking whether the radian and roundness are smooth and smooth. In addition to ensuring the consistency of the shape, it should also ensure the flatness of the woodworking surface and whether there is bulge or damage. 4. In carpentry, the normal corner of corner and parquet is 90 degrees (except for special design). The correct wooden parquet should be seamless or uniform spacing. Finally, check whether the cabinet door switch is normal and whether the nail hole is repaired. When the cabinet door is opened, it is light and has no strange sound. The nails used in the ceiling structure need to be coated with antirust paint on the nail holes. The five key points to ensure the acceptance of wooden doors and windows are still dry goods. 1. The acceptance of wooden windows is much simpler for this part. The first step is to check the appearance. As long as the paint film on the surface of the wooden window is smooth and bright, and there are no sags, bubbles, wrinkles and other defects, it is OK (if you are not blind). 2. If you are not astigmatism, I believe you can see whether the doors and windows are square. Whether the door and window sash is consistent with the door and window frame. If the gap between the door and window sash and the frame is too large. It can be removed and repaired again. If the door and window frame is not vertical, the gasket in the frame plate should be aligned. 3. If the door and window cover is made of blockboard or density board, the base plate should be fixed on the base keel of the window frame first. Knock the side panel of the door and window cover by hand. If there is an empty drum, it means that the bottom layer is not padded with Blockboard and other base plates, and it should be redone. 4. It is also important to check the hinge. If it is not aligned, it will lead to the mismatch between the door and window sash and the frame sleeve. Also, the hinge screws may be short, or the screws may be screwed in one after another, but the screws are not screwed in, which will lead to the door and window leaves not fixed

5. One key and one lock. The two parts locked on the door leaf and the door frame should be consistent. If the lock is not installed properly, you know! The acceptance of wooden keel ceiling in the medium-term acceptance is a concealed project. If it is accepted after completion, nothing can be found, and it will be troublesome if something goes wrong.? Quality of wood keel the knot of wood keel cannot be greater than 1/3 of the section. The small area size of horizontal wood keel should be 25*30mm, and the large area ceiling should be 25*35mm? The wooden keel must be treated with fire prevention and fire retardation, and the fireproof coating must be painted before installation. The thickness and brushing method of the paint should be in strict accordance with the instructions. The spacing between main keels shall not be greater than 300mm, the spacing between secondary keels shall not be greater than 400mm, and the overhanging length of cantilever keels shall not be greater than 150mm. This set of data dare not be moved at will in this series. The wooden keel shall be arranged neatly during installation, and there shall be no obvious dislocation and dislocation at the lap joint, and the spacing of suspenders shall not be greater than 600mm, and it shall be symmetrical on both sides of the horizontal keel, so the butt misalignment deviation of the secondary keel at the joint shall not be greater than 2mm. It's really a long time since our editor introduced such dry goods to the bobbins in such a serious way. Don't thank me too much. If you have to thank me, please send me a red envelope. The wechat is @! ¥@!@& hellip;& hellip;

昆明外阴白斑医院

珠海男科医院

成都癫痫医院

淄博男科医院

Copyright © 2011 JIN SHI